Implementation of Bridge Navigational Watch Alarms:

The requirements making it mandatory to have a bridge navigational watch alarm system (BNWAS) fitted to all passenger and cargo vessels can be found in the amendments made to SOLAS Chapter V Regulation 19 that were adopted by the IMO on 5th June 2009 in Resolution MSC.282(86).

The changes see the following subparagraph is added to paragraph 2.2 of the regulations:

.3 a bridge navigational watch alarm system (BNWAS), as follows:

.1 cargo ships of 150 gross tonnage and upwards and passenger ships irrespective of size constructed on or after 1 July 2011;

.2 passenger ships irrespective of size constructed before 1 July 2011, not later than the first survey* after 1 July 2012;

.3 cargo ships of 3,000 gross tonnage and upwards constructed before 1 July 2011, not later than the first survey* after 1 July 2012;

.4 cargo ships of 500 gross tonnage and upwards but less than 3,000 gross tonnage constructed before 1 July 2011, not later than the first survey* after 1 July 2013; and

.5 cargo ships of 150 gross tonnage and upwards but less than 500 gross tonnage constructed before 1 July 2011, not later than the first survey* after 1 July 2014.

The bridge navigational watch alarm system shall be in operation whenever the ship is underway at sea;

.4 a bridge navigational watch alarm system (BNWAS) installed prior to 1 July 2011 may subsequently be exempted from full compliance with the standards adopted by the Organization, at the discretion of the Administration."

IEC 62616:2010 – International Performance Standards
IEC is the world’s leading organisation of international standards for all electrical, electronic and related technologies. IEC 62616:2010(E) specifies the minimum performance requirements, technical characteristics and methods of testing, and required test results, for a bridge navigational watch alarm system (BNWAS) as required by Chapter V of the International Convention for the Safety of Life at Sea (SOLAS), as amended. It takes account of the general requirements given in IMO resolution A.694(17) and is associated with IEC 60945. When a requirement in this International Standard is different from IEC 60945, the requirement in this standard takes precedence.

This standard incorporates the parts of the performance standards included in IMO resolution
MSC.128(75).

For more information contact sales.gai@L-3com.com.